Skip to main content

Court2CM Installation Guide

Raise a support ticket

DISCLAIMER​

Any advice FYB provides in relation to setting up any FYB App, FYB Add-in, FYB Connector and or advice in relation to opening access to your on-premises or in the cloud systems will be general advice only. This means that the advice is of a general nature and will not take into account your network setup, network infrastructure or any security requirements that you may have or in fact need. It is highly advised that you seek advice from internal or external providers to ensure that they are comfortable with what is required prior to going ahead with any deployment, setup, or configuration for external access.

LICENSE DETAILS​

Please contact FYB for a valid license if you are yet to obtain one for your Add-In.

INSTALLATION COMPONENTS​

The following installation components are required to ensure the full functionality of the FYB Court2CM:

  • FYB Court2CM web application - this is a server-side installation

INSTALLING FYB COURT2CM​

LICENSE​

  1. Create a folder to house the license file (.lic) on the IIS Server

  2. Place the license file in this folder

    Note

    Please be aware you will be asked to enter this location during the installation

TRUSTED USER ACCOUNT​

Add the account that will run the application pool as a Trusted User in Enterprise Studio. Please refer to your Enterprise Studio help file on adding trusted accounts. If using a system account (application pool identity, network service etc) you will be required to enter the details as DOMAIN\ServerName$. If using a dedicated windows service account, you will be required to enter the details as DOMAIN\username.

INSTALLATION​

Warning

Before running the MSI ensure that all prerequisites are complete. Including deploying the .NET 6 SDK and Hosting Bundle.

To deploy the Net Core SDK and Hosting Bundle to the server, follow these steps:

  1. Install the latest .NET 6 SDK (x64) found here

    2023-03-24_9-15-30.png

  2. Install the latest ASP.NET Core 6 Runtime Hosting Bundle found here

    2023-03-24_9-14-27.png

  3. Once both executables have been installed, complete a full server restart to allow for .NET 6 to bind to IIS. If a server restart is not possible an IIS reset can be completed with the following CMDs from an elevated command prompt.

    • net stop was /y
    • net start w3svc
    • iisreset
    Note

    To check that the SDK has been attached to the hosting bundle, open Command Prompt and type dotnet --info

    2022-06-03_17-02-10.png

The Court2CM MSI will:

  • Deploy the installation files
  • Setup the application pool and application in IIS
  • Setup the temp folder
  • Configure the Court2CM as specified by the user

To install the Court2CM Application, follow these steps:

  1. Run command prompt as an administrator and launch the court2cm.msi

  2. Click on the Next button

    2023-03-24_9-18-08.png

  3. On the Web Application Settings screen select the HTTPS protected site (recommended) to host the application. Click on the Next button

    Note

    The virtual directory name must remain as Court2CM and it cannot be renamed.

    IIS Directory

    The application must be installed under the dedicated site as an application. It cannot be installed at the site level

    image.png

    2023-03-24_9-19-16.png

  4. On the Application Pool Settings screen (below), enter the domain, username, and password for the Application Pool identity. Click on the Next button

    2023-03-24_9-20-46.png  

  5. On the Configuration Settings screen enter the required information. Further details are in the table below. Click on the Next button

    2023-03-24_9-23-47.png

    FIELDDESCRIPTION
    Dataset IDContent Manager two-character dataset identifier
    Workgroup ServerContent Manager workgroup server name. This should generally be set to local
    License PathLocal path to Court2CM license file
    Temp PathLocal temporary directory used by the application to cache content manager documents. Please include the trailing slash, for example: C:\FYB Add-Ins\Court2CM\
  6. On the Record Settings screen, enter the following fields:

    2023-03-24_9-25-21.png

    FIELDDESCRIPTION
    Court File Record Type URIThe Content Manager Record Type URI that Court2CM will utilise to display Court Files.
    Supervisor Notes Record Type URIThe Content Manager Record Type URI used for Supervisor notes records
    Prosecution Notes Record Type URIThe Content Manager Record Type URI used for Prosecution notes records
    Court File Document Record Type URIThe Content Manager Record Type URI used for Court file documents
    CFT Group Location URIThe URI of the location group that users will need to be a part of to have access to Court2CM
  7. On the Email Settings screen, enter the following fields

    2023-03-24_9-55-49.png

    FIELDDESCRIPTION
    License ContactsContacts that will receive a notification when the 3652CM license is about to expire. Multiple email addresses can be added if separated with a ;
    From AddressThe email address that all email notifications are sent from
    Mail HostThe mail host that is used to send all email notifications from
    Mail PortThe mail port
  8. On the Custom Setup screen select the install location and click on the Next button

    2023-03-24_9-57-31.png

  9. From the Confirm Installation window click on the Install button

    2023-03-24_9-58-31.png  

  10. The installation will commence

    2023-03-24_9-59-32.png

  11. Once the installation is complete click on the Finish button

    2023-03-24_10-00-30.png

CONFIGURATION​

IIS CONFIGURATION​

  1. After the installation process is complete, you will be able to locate the application installed within the site selected during installation

  2. From the Features View double click on Authentication button and ensure that only Windows Authentication is enabled

    2023-03-24_10-01-25.png 2022-12-02_12-11-59.png

  3. Right click the application in IIS and select the explore option

    app.jpg

  4. Right click on the app data folder and select properties

    prop.jpg

  5. Navigate to the security tab and ensure users have read, write and modify permissions

    permiss.jpg

  6. Click on Application Pools

    image.png

  7. Within the application pool listing screen, right click on Court2CM application pool and select the Advanced Settings option from the drop-down menu

    2023-03-24_10-04-04.png

  8. Within the Advanced Settings window, set Start Mode to AlwaysRunning, Idle Time-out Action to Suspend and Idle Time-out Action (minutes) to 0

    2021-07-23_14-21-09.jpg

  9. Click on the OK button

  10. Select the Court2CM application in IIS and navigate to its Advanced Settings

    2023-03-24_10-05-22.png

  11. Set Preload Enabled to True and click on the OK button

    2023-03-24_10-06-31.png

CONTENT MANAGER CONFIGURATION​

The following additional fields are mandatory and need to be on the Record Types that you will be using for Court2CM.

Note

All names of fields below are examples and can be set to your organisation's desired terminology.

NameData FormatRecord Type
Amount/CertificateString (Amount/Certificate Lookup Set)QA - Prosecution Note
Appearance MethodString (Appearance Method Lookup Set)Court File
Arr/SummString (CFT Arrest Lookup Set)Court File
Arresting OfficerStringCourt File
Charge IDStringCourt File
Check By Supervisor as correctBooleanQA - Prosecution Note, Supervisor - Prosecution Note
Checked by SupervisorBooleanQA - Prosecution Note, Supervisor - Prosecution Note
Close DateDateCourt File
Complainant NameStringCourt File
Complaint NoStringCourt File
Court LocationString (Court Location Lookup Set)Court File
DOI Request PendingBooleanCourt File
Date RequestedDate and TimeDocument - Prosecution
Date of DisclosureDateCourt File, Document - Prosecution
Date of OffenceDateCourt File
Date/Time of First AppearanceDate/Time of First AppearanceCourt File
Date/Time of Second AppearanceDate and TimeCourt File
Document DisclosedBooleanDocument - Prosecution
File TypeString (File Type Lookup Set)Court File
Further action requiredBooleanQA - Prosecution Note, Supervisor - Prosecution Note
Intended DestinationString (Intended Destination Lookup Set)Court File
Joint ChargedBooleanCourt File
Managed ByString (Managed By Lookup Set)Court File
Offence DetailsStringCourt File
Offender DOBDateCourt File
Prosecution Document TypeString (CFT Document Types)Document - Prosecution
Receipt NumberStringQA - Prosecution Note
Requested ByStringDocument - Prosecution
RequestedBooleanDocument - Prosecution
Station of OriginStringCourt File
Tas Pol PR File NumberStringCourt File
Type Of AppearanceString (TypeOfAppearance Lookup Set)Court File

UNINSTALLING COURT2CM​

To uninstall FYB Court2CM using the MSI please follow the steps below:

  1. Double click on Court2CM MSI

    2023-03-24_9-03-34.png

  2. The Court2CM uninstallation window will appear

  3. Click on the Next button

    2023-03-24_9-04-36.png

  4. Click on the Remove button

    2023-03-24_9-05-58.png

  5. On the next window click on the Remove button

    2023-03-24_9-08-34.png

  6. The application uninstallation process will commence

    2023-03-24_9-09-53.png

  7. Click on the Finish button, the application is now removed from the system

    2023-03-24_9-11-03.png